Distance from Banora Point, NSW to Townsville, QLD
How far is it from Banora Point, NSW to Townsville, QLD? See straight-line and estimated driving distances in kilometres and miles.
This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.
Print or Save Offline
Use your browser print dialog to print this distance page or save it as a PDF.
Route Stats Summary
Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.
Trip Energy and Cost
Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.
Truck Fuel Consumption and Cost
Electric Truck Consumption and Charging
- This is a charging-dependent electric truck trip. Treat the estimate as a planning baseline, then confirm compatible charging stops before departure.
- Likely needs 8 charging stops unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
- No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.
Distance Breakdown
| Straight-line (as the crow flies) | 1,208 km 751 miles |
| Estimated driving distance | 1,450 km 901 miles |
Cities and Places Along the Route Corridor
Rest Stop Recommendations
Plan 8 short breaks About every 2 hours of driving time
- Early break Take one short break near Maroochydore, QLD if the live route still follows this corridor.
- Mid-route break Take one short break near Rockhampton, QLD if the live route still follows this corridor.
- Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
Suggested Overnight Stops
Cities Along the Route
Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.
Route Introduction
This page compares the direct distance between Banora Point, NSW and Townsville, QLD with a modeled driving distance of about 1450 km, so you can judge the trip before checking a live route.
Route Context
- The modeled road trip is about 242 km longer than the direct distance, which is common when roads cannot follow a straight path.
- Most of this reference trip is driven over a longer intercity distance, so stop planning matters more than local street detail.
Travel Factors
| Reference road distance | 1450 km901 mi |
| Modeled from the stored city pair and the site distance estimator. | |
| Reference drive time | 17 hrs 9 min |
| This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan. | |
| Modeled planning speed | 85 km/h53 mph |
| Used only to model the reference travel time. It does not reflect live traffic or road conditions. | |
| Urban-delay exposure | Lower |
| Based on the population scale around Banora Point, NSW and Townsville, QLD, which can make departure and arrival less predictable than the middle portion of the drive. | |
| Best use | Trip comparison |
| Useful when you want a quick distance reference before opening a live route. | |
Practical Travel Tips
- Plan at least one break instead of treating the estimate as uninterrupted wheel time.
- Check fuel, charging, or meal-stop options before departure, because longer trips are less forgiving if you leave too little margin.
- Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.
FAQ
How far is Banora Point, NSW from Townsville, QLD by road?
The page models the road trip at about 1450 km (901 miles). That is a reference estimate, not a live turn-by-turn route result.
What is the straight-line distance between Banora Point, NSW and Townsville, QLD?
The direct geographic gap is about 1208 km. It is useful as a comparison point, but it is not the same as a drivable route.
How long does it take to drive from Banora Point, NSW to Townsville, QLD?
The reference driving time on this page is 17 hrs 9 min. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.
Is this a live navigation route?
No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.
How much fuel or electricity could the Banora Point, NSW to Townsville, QLD trip use?
The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.
Why can the driving distance differ from the direct distance?
Roads rarely follow the shortest possible line, so a drivable trip is often meaningfully longer than the direct geographic gap.
Keep Exploring
-
Route overview for Banora Point, NSW to Townsville, QLD
See the route reference page for the same city pair.
-
Travel time page for Banora Point, NSW to Townsville, QLD
See the time-focused reference page for the same pair.
-
More routes from Banora Point, NSW
Explore more outbound route references from the same origin.
-
More routes to Townsville, QLD
Explore more inbound route references to the same destination.
-
Sydney, NSW to Canberra, ACT
Another route reference in the same country cluster.
-
Brisbane, QLD to Perth, WA
Another route reference in the same country cluster.
-
Driving Guide
Reference driving rules and guidance for the wider area.