Sydney, NSW to Perth, WA Distance
How far is it from Sydney, NSW to Perth, WA? See straight-line and estimated driving distances in kilometres and miles.
This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.
Print or Save Offline
Use your browser print dialog to print this distance page or save it as a PDF.
Route Stats Summary
Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.
Reverse Route
Use the return-direction page when you want the same reference data for the trip back.
Trip Energy and Cost
Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.
Truck Fuel Consumption and Cost
Electric Truck Consumption and Charging
- This is a charging-dependent electric truck trip. Treat the estimate as a planning baseline, then confirm compatible charging stops before departure.
- Likely needs 22 charging stops unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
- No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.
Distance Breakdown
| Straight-line (as the crow flies) | 3,290 km 2,044 miles |
| Estimated driving distance | 3,948 km 2,453 miles |
Cities and Places Along the Route Corridor
Rest Stop Recommendations
Plan 23 short breaks About every 2 hours of driving time
- Early break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
- Mid-route break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
- Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
Suggested Overnight Stops
Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.
Route Introduction
This page compares the direct distance between Sydney, NSW and Perth, WA with a modeled driving distance of about 3948 km, so you can judge the trip before checking a live route.
Route Context
- The modeled road trip is about 658 km longer than the direct distance, which is common when roads cannot follow a straight path.
- Both ends of the trip are large urban areas, so city entry and exit time can matter as much as the middle portion of the drive.
Travel Factors
| Reference road distance | 3948 km2453 mi |
| Modeled from the stored city pair and the site distance estimator. | |
| Reference drive time | 1 day 22 hrs |
| This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan. | |
| Modeled planning speed | 85 km/h53 mph |
| Used only to model the reference travel time. It does not reflect live traffic or road conditions. | |
| Urban-delay exposure | Higher |
| Based on the population scale around Sydney, NSW and Perth, WA, which can make departure and arrival less predictable than the middle portion of the drive. | |
| Best use | Trip comparison |
| Useful when you want a quick distance reference before opening a live route. | |
Practical Travel Tips
- Plan at least one break instead of treating the estimate as uninterrupted wheel time.
- Check fuel, charging, or meal-stop options before departure, because longer trips are less forgiving if you leave too little margin.
- If you can choose your departure time, leaving Sydney, NSW outside the busiest local period can reduce early-route delay.
- Arrival timing matters near Perth, WA because the last segment of the drive is often less predictable than the open-road portion.
- Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.
FAQ
How far is Sydney, NSW from Perth, WA by road?
The page models the road trip at about 3948 km (2453 miles). That is a reference estimate, not a live turn-by-turn route result.
What is the straight-line distance between Sydney, NSW and Perth, WA?
The direct geographic gap is about 3290 km. It is useful as a comparison point, but it is not the same as a drivable route.
How long does it take to drive from Sydney, NSW to Perth, WA?
The reference driving time on this page is 1 day 22 hrs. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.
Is this a live navigation route?
No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.
How much fuel or electricity could the Sydney, NSW to Perth, WA trip use?
The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.
Why can the driving distance differ from the direct distance?
Roads rarely follow the shortest possible line, so a drivable trip is often meaningfully longer than the direct geographic gap.
Keep Exploring
-
Reverse trip from Perth, WA to Sydney, NSW
Open the return direction as part of the same route cluster.
-
Route overview for Sydney, NSW to Perth, WA
See the route reference page for the same city pair.
-
Travel time page for Sydney, NSW to Perth, WA
See the time-focused reference page for the same pair.
-
More routes from Sydney, NSW
Explore more outbound route references from the same origin.
-
More routes to Perth, WA
Explore more inbound route references to the same destination.
-
Ballarat, VIC to Melbourne, VIC
Another route reference in the same country cluster.
-
Morwell, VIC to Melbourne, VIC
Another route reference in the same country cluster.
-
Driving Guide
Reference driving rules and guidance for the wider area.