Burnie, TAS to Hobart, TAS Truck Route
Step-by-step driving route from Burnie, TAS to Hobart, TAS.
Route Stats Summary
Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.
This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.
Print or Save Offline
Use your browser print dialog to print this route page or save it as a PDF.
Driving Time
Travel Duration and Local Time
Reference pages show modeled timing. The clocks below update in the browser using the stored city timezones.
Trip Energy and Cost
Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.
Truck Fuel Consumption and Cost
Electric Truck Consumption and Charging
- Check commercial charging availability before departure because payload, speed, terrain, and weather can materially change electric truck range.
- Likely needs 1 charging stop unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
- No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.
Distance Details
| Straight-line distance | 235 km 146 miles |
| Driving distance (est.) | 305 km 190 miles |
Route Introduction
This Burnie, TAS to Hobart, TAS page is a reference overview with modeled distance, modeled drive time, and route-specific links. Use the live planner when you need an actual navigable route.
Route Context
- The modeled road trip is about 70 km longer than the direct distance, which is common when roads cannot follow a straight path.
- Most of this reference trip is driven over a longer intercity distance, so stop planning matters more than local street detail.
- Burnie, TAS and Hobart, TAS are both listed in Tasmania, which is another reason to treat this page as a route reference rather than a live guidance result.
Travel Factors
| Reference road distance | 305 km190 mi |
| Modeled from the stored city pair and the site distance estimator. | |
| Reference drive time | 4 hrs 9 min |
| This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan. | |
| Modeled planning speed | 75 km/h47 mph |
| Used only to model the reference travel time. It does not reflect live traffic or road conditions. | |
| Urban-delay exposure | Lower |
| Based on the population scale around Burnie, TAS and Hobart, TAS, which can make departure and arrival less predictable than the middle portion of the drive. | |
Practical Travel Tips
- Plan at least one break instead of treating the estimate as uninterrupted wheel time.
- Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.
Cities and Places Along the Route Corridor
Rest Stop Recommendations
Plan 2 short breaks About every 2 hours of driving time
- Early break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
- Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.
FAQ
How far is Burnie, TAS from Hobart, TAS by road?
The page models the road trip at about 305 km (190 miles). That is a reference estimate, not a live turn-by-turn route result.
What is the straight-line distance between Burnie, TAS and Hobart, TAS?
The direct geographic gap is about 235 km. It is useful as a comparison point, but it is not the same as a drivable route.
How long does it take to drive from Burnie, TAS to Hobart, TAS?
The reference driving time on this page is 4 hrs 9 min. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.
Is this a live navigation route?
No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.
How much fuel or electricity could the Burnie, TAS to Hobart, TAS trip use?
The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.
Why can the driving distance differ from the direct distance?
Roads rarely follow the shortest possible line, so a drivable trip is often meaningfully longer than the direct geographic gap.
Keep Exploring
-
Distance page for Burnie, TAS to Hobart, TAS
Compare the direct gap with the modeled road distance.
-
Travel time page for Burnie, TAS to Hobart, TAS
See the time-focused reference page for the same pair.
-
More routes from Burnie, TAS
Explore more outbound route references from the same origin.
-
More routes to Hobart, TAS
Explore more inbound route references to the same destination.
-
Burnie, TAS to Melbourne, VIC
Related city-pair coverage with a shared endpoint.
-
Burnie, TAS to Sydney, NSW
Related city-pair coverage with a shared endpoint.
-
Brisbane, QLD to Perth, WA
Another route reference in the same country cluster.
-
Sydney, NSW to Canberra, ACT
Another route reference in the same country cluster.
Related Pages
More routes from Burnie, TAS
More routes to Hobart, TAS
Popular Routes
Driving Guides
Driving from Burnie, TAS to Hobart, TAS
The drive from Burnie, TAS to Hobart, TAS covers approximately 305 km190 miles and typically takes 4 hrs 9 min under normal conditions.
Route Overview
- Distance: 305 km190 miles
- Estimated travel time: 4 hrs 9 min
Driving Conditions
This route primarily follows major roads and highways. Traffic conditions may vary depending on time of day, especially near urban areas.
Travel Tips
- Plan fuel stops in advance for longer journeys
- Take breaks during extended drives