TruckDrivingDirections.com

Hobart, TAS to Townsville, QLD – Truck Route Overview

Step-by-step driving route from Hobart, TAS to Townsville, QLD.

Driving Distance
3,154 km1,960 miles
Estimated Drive Time
1 day 13 hrs
Straight-line
2,628 km1,633 miles

Route Stats Summary

Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.

Trip profile
Cross-country drive
Estimated fuel used
1,009.2 L264.8 gal
Estimated EV usage
4,099.7 kWh
Suggested breaks
Plan 18 short breaks

This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.

Plan Live Route
Get live directions with the planner prefilled for this city pair.

Driving Time

Travel Duration and Local Time

Reference pages show modeled timing. The clocks below update in the browser using the stored city timezones.

Origin local time
2:28:19 AM
Australia/Hobart
Destination local time
2:28:19 AM
Australia/Brisbane
If leaving now: continuous estimate
1 day 13 hr
Estimated arrival in AEST
Apr 26, 2026, 3:44 PM AEST
If leaving now: recommended travel duration
5-6 days with overnight rest stops
Estimated arrival in AEST
Apr 28, 2026, 4:14 AM AEST

Reverse Route

Townsville, QLD to Hobart, TAS

Use the return-direction page when you want the same reference data for the trip back.

Distance: 3154 km1960 mi
Drive time: 1 day 13 hr

Trip Energy and Cost

Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.

Truck Fuel Consumption and Cost

This baseline uses a truck-oriented average. Enter your own fleet or vehicle consumption if you want a more accurate trip-cost estimate.
Estimated fuel used: 1,009.2 L264.8 gal
Trip fuel cost: Enter a price

Electric Truck Consumption and Charging

Estimated energy used: 4,099.7 kWh
Trip charging cost: Enter a price
  • This is a charging-dependent electric truck trip. Treat the estimate as a planning baseline, then confirm compatible charging stops before departure.
  • Likely needs 18 charging stops unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
  • No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.

Distance Details

Straight-line distance 2,628 km 1,633 miles
Driving distance (est.) 3,154 km 1,960 miles

Route Introduction

This Hobart, TAS to Townsville, QLD page is a reference overview with modeled distance, modeled drive time, and route-specific links. Use the live planner when you need an actual navigable route.

Route Context

  • The modeled road trip is about 526 km longer than the direct distance, which is common when roads cannot follow a straight path.
  • Most of this reference trip is driven over a longer intercity distance, so stop planning matters more than local street detail.

Travel Factors

Reference road distance 3154 km1960 mi
Modeled from the stored city pair and the site distance estimator.
Reference drive time 1 day 13 hrs
This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan.
Modeled planning speed 85 km/h53 mph
Used only to model the reference travel time. It does not reflect live traffic or road conditions.
Urban-delay exposure Lower
Based on the population scale around Hobart, TAS and Townsville, QLD, which can make departure and arrival less predictable than the middle portion of the drive.

Practical Travel Tips

  • Plan at least one break instead of treating the estimate as uninterrupted wheel time.
  • Check fuel, charging, or meal-stop options before departure, because longer trips are less forgiving if you leave too little margin.
  • Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.

Cities and Places Along the Route Corridor

Rest Stop Recommendations

Plan 18 short breaks About every 2 hours of driving time

  • Early break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
  • Mid-route break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
  • Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.

Suggested Overnight Stops

Day 1
Hobart, TAS to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 2
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 3
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 4
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 5
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 6
rest point along the corridor to Townsville, QLD
Final arrival day.

Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.

FAQ

How far is Hobart, TAS from Townsville, QLD by road?

The page models the road trip at about 3154 km (1960 miles). That is a reference estimate, not a live turn-by-turn route result.

What is the straight-line distance between Hobart, TAS and Townsville, QLD?

The direct geographic gap is about 2628 km. It is useful as a comparison point, but it is not the same as a drivable route.

How long does it take to drive from Hobart, TAS to Townsville, QLD?

The reference driving time on this page is 1 day 13 hrs. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.

Is this a live navigation route?

No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.

How much fuel or electricity could the Hobart, TAS to Townsville, QLD trip use?

The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.

Why can the driving distance differ from the direct distance?

Roads rarely follow the shortest possible line, so a drivable trip is often meaningfully longer than the direct geographic gap.

Keep Exploring

More routes from Hobart, TAS

Popular Routes

Driving Guides

Driving from Hobart, TAS to Townsville, QLD

The drive from Hobart, TAS to Townsville, QLD covers approximately 3,154 km1,960 miles and typically takes 1 day 13 hrs under normal conditions.

Route Overview

  • Distance: 3,154 km1,960 miles
  • Estimated travel time: 1 day 13 hrs

Driving Conditions

This route primarily follows major roads and highways. Traffic conditions may vary depending on time of day, especially near urban areas.

Travel Tips

  • Plan fuel stops in advance for longer journeys
  • Take breaks during extended drives