TruckDrivingDirections.com

Perth, WA to Townsville, QLD – Truck Route Overview

Step-by-step driving route from Perth, WA to Townsville, QLD.

Perth, WA to Townsville, QLD – Truck Route Overview
Source: TruckDrivingDirections.com
Generated: 24 Apr 2026, 15:57 UTC
Page type: route
Driving Distance
4,073 km2,531 miles
Estimated Drive Time
2 days
Straight-line
3,394 km2,109 miles

Route Stats Summary

Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.

Trip profile
Cross-country drive
Estimated fuel used
1,303.4 L342.0 gal
Estimated EV usage
5,294.9 kWh
Suggested breaks
Plan 24 short breaks

This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.

Plan Live Route
Get live directions with the planner prefilled for this city pair.

Print or Save Offline

Use your browser print dialog to print this route page or save it as a PDF.

Travel Duration and Local Time

Reference pages show modeled timing. The clocks below update in the browser using the stored city timezones.

Origin local time
11:57:28 PM
Australia/Perth
Destination local time
1:57:28 AM
Australia/Brisbane
If leaving now: continuous estimate
2 days
Estimated arrival in AEST
Apr 27, 2026, 2:12 AM AEST
If leaving now: recommended travel duration
7-8 days with overnight rest stops
Estimated arrival in AEST
Apr 29, 2026, 8:12 AM AEST

Reverse Route

Townsville, QLD to Perth, WA

Use the return-direction page when you want the same reference data for the trip back.

Distance: 4073 km2531 mi
Drive time: 2 days

Trip Energy and Cost

Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.

Truck Fuel Consumption and Cost

This baseline uses a truck-oriented average. Enter your own fleet or vehicle consumption if you want a more accurate trip-cost estimate.
Estimated fuel used: 1,303.4 L342.0 gal
Trip fuel cost: Enter a price

Electric Truck Consumption and Charging

Estimated energy used: 5,294.9 kWh
Trip charging cost: Enter a price
  • This is a charging-dependent electric truck trip. Treat the estimate as a planning baseline, then confirm compatible charging stops before departure.
  • Likely needs 23 charging stops unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
  • No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.

Distance Details

Straight-line distance 3,394 km 2,109 miles
Driving distance (est.) 4,073 km 2,531 miles

Route Introduction

This Perth, WA to Townsville, QLD page is a reference overview with modeled distance, modeled drive time, and route-specific links. Use the live planner when you need an actual navigable route.

Route Context

  • The modeled road trip is about 679 km longer than the direct distance, which is common when roads cannot follow a straight path.
  • One end of the trip is a large urban area, so the final approach can add more variability than the open-road segment.

Travel Factors

Reference road distance 4073 km2531 mi
Modeled from the stored city pair and the site distance estimator.
Reference drive time 2 days
This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan.
Modeled planning speed 85 km/h53 mph
Used only to model the reference travel time. It does not reflect live traffic or road conditions.
Urban-delay exposure Higher
Based on the population scale around Perth, WA and Townsville, QLD, which can make departure and arrival less predictable than the middle portion of the drive.

Practical Travel Tips

  • Plan at least one break instead of treating the estimate as uninterrupted wheel time.
  • Check fuel, charging, or meal-stop options before departure, because longer trips are less forgiving if you leave too little margin.
  • If you can choose your departure time, leaving Perth, WA outside the busiest local period can reduce early-route delay.
  • Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.

Cities and Places Along the Route Corridor

Rest Stop Recommendations

Plan 24 short breaks About every 2 hours of driving time

  • Early break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
  • Mid-route break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
  • Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.

Suggested Overnight Stops

Day 1
Perth, WA to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 2
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 3
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 4
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 5
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 6
rest point along the corridor to rest point along the corridor
Aim for roughly 6-8 hours of wheel time before stopping overnight.
Day 7
rest point along the corridor to Townsville, QLD
Final arrival day.

Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.

FAQ

How far is Perth, WA from Townsville, QLD by road?

The page models the road trip at about 4073 km (2531 miles). That is a reference estimate, not a live turn-by-turn route result.

What is the straight-line distance between Perth, WA and Townsville, QLD?

The direct geographic gap is about 3394 km. It is useful as a comparison point, but it is not the same as a drivable route.

How long does it take to drive from Perth, WA to Townsville, QLD?

The reference driving time on this page is 2 days. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.

Is this a live navigation route?

No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.

How much fuel or electricity could the Perth, WA to Townsville, QLD trip use?

The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.

Why can the driving distance differ from the direct distance?

Roads rarely follow the shortest possible line, so a drivable trip is often meaningfully longer than the direct geographic gap.

Keep Exploring

Related Pages

Distance: Perth, WA to Townsville, QLD
Travel Time: Perth, WA to Townsville, QLD
Routes from Perth, WA
Routes to Townsville, QLD
Reverse: Townsville, QLD to Perth, WA

More routes from Perth, WA

Perth, WA to Melbourne, VIC 2,721.4 km1,691.0 mi
Perth, WA to Sydney, NSW 3,289.7 km2,044.1 mi
Perth, WA to Brisbane, QLD 3,606.5 km2,241.0 mi
Perth, WA to Adelaide, SA 2,130.9 km1,324.1 mi
Perth, WA to Canberra, ACT 3,088.0 km1,918.8 mi
Perth, WA to Hobart, TAS 3,010.0 km1,870.3 mi
Perth, WA to Gold Coast, QLD 3,624.0 km2,251.8 mi
Perth, WA to Newcastle, NSW 3,353.7 km2,083.9 mi
Perth, WA to Cairns, QLD 3,442.0 km2,138.8 mi
Perth, WA to Mandurah, WA 65.0 km40.4 mi

More routes to Townsville, QLD

Cairns, QLD to Townsville, QLD 281.3 km174.8 mi
Mackay, QLD to Townsville, QLD 324.6 km201.7 mi
Emerald, QLD to Townsville, QLD 494.9 km307.5 mi
Rockhampton, QLD to Townsville, QLD 597.7 km371.4 mi
Gladstone, QLD to Townsville, QLD 686.5 km426.6 mi
Bundaberg, QLD to Townsville, QLD 845.3 km525.2 mi
Hervey Bay, QLD to Townsville, QLD 913.6 km567.7 mi
Maryborough, QLD to Townsville, QLD 924.3 km574.3 mi
Maroochydore, QLD to Townsville, QLD 1,044.1 km648.8 mi
Buderim, QLD to Townsville, QLD 1,044.1 km648.8 mi

Popular Routes

Sydney, NSW to Canberra, ACT 247.3 km153.7 mi
Ballarat, VIC to Melbourne, VIC 102.1 km63.4 mi
Sydney, NSW to Melbourne, VIC 713.0 km443.0 mi
Morwell, VIC to Melbourne, VIC 134.2 km83.4 mi
Newcastle, NSW to Sydney, NSW 116.1 km72.1 mi

Driving Guides

Driving from Perth, WA to Townsville, QLD

The drive from Perth, WA to Townsville, QLD covers approximately 4,073 km2,531 miles and typically takes 2 days under normal conditions.

Route Overview

  • Distance: 4,073 km2,531 miles
  • Estimated travel time: 2 days

Driving Conditions

This route primarily follows major roads and highways. Traffic conditions may vary depending on time of day, especially near urban areas.

Travel Tips

  • Plan fuel stops in advance for longer journeys
  • Take breaks during extended drives

Explore More Routes and Travel Options