Alice Springs, NT to Perth, WA – Truck Time Estimate
How long does it take to drive from Alice Springs, NT to Perth, WA? Estimated drive time, traffic factors and arrival time calculations.
Based on distance and average speed estimates, not live routing data.
This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.
Print or Save Offline
Use your browser print dialog to print this travel time page or save it as a PDF.
Route Stats Summary
Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.
Trip Energy and Cost
Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.
Truck Fuel Consumption and Cost
Electric Truck Consumption and Charging
- This is a charging-dependent electric truck trip. Treat the estimate as a planning baseline, then confirm compatible charging stops before departure.
- Likely needs 13 charging stops unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
- No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.
Travel Time Details
| Estimated driving time | 1 day 4 hrs |
| Driving distance (est.) | 2,389 km 1,484 miles |
| Straight-line distance | 1,991 km 1,237 miles |
Traffic Factors
These are estimated factors used in the calculation. They do not reflect live traffic conditions.
| Average speed used | 85 km/h53 mph |
| Urban delay near Perth, WA | +15 min |
Travel Tips
- This is a long drive. Plan rest stops every 2 hours and carry water and snacks.
- Fill up your tank before departing — fuel stations may be sparse on some stretches.
- Departing early in the morning can help you avoid peak traffic in urban areas.
- Actual travel time may vary based on weather, road conditions, and traffic.
Cities and Places Along the Route Corridor
Rest Stop Recommendations
Plan 14 short breaks About every 2 hours of driving time
- Early break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
- Mid-route break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
- Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
Suggested Overnight Stops
Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.
Route Introduction
The reference drive time from Alice Springs, NT to Perth, WA is about 1 day 4 hrs. It is a modeled estimate based on distance and endpoint delay assumptions, not live traffic.
Route Context
- The modeled road trip is about 398 km longer than the direct distance, which is common when roads cannot follow a straight path.
- One end of the trip is a large urban area, so the final approach can add more variability than the open-road segment.
Travel Factors
| Reference road distance | 2389 km1484 mi |
| Modeled from the stored city pair and the site distance estimator. | |
| Reference drive time | 1 day 4 hrs |
| This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan. | |
| Modeled planning speed | 85 km/h53 mph |
| Used only to model the reference travel time. It does not reflect live traffic or road conditions. | |
| Urban-delay exposure | Higher |
| Based on the population scale around Alice Springs, NT and Perth, WA, which can make departure and arrival less predictable than the middle portion of the drive. | |
Practical Travel Tips
- Plan at least one break instead of treating the estimate as uninterrupted wheel time.
- Check fuel, charging, or meal-stop options before departure, because longer trips are less forgiving if you leave too little margin.
- Arrival timing matters near Perth, WA because the last segment of the drive is often less predictable than the open-road portion.
- Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.
FAQ
How far is Alice Springs, NT from Perth, WA by road?
The page models the road trip at about 2389 km (1484 miles). That is a reference estimate, not a live turn-by-turn route result.
What is the straight-line distance between Alice Springs, NT and Perth, WA?
The direct geographic gap is about 1991 km. It is useful as a comparison point, but it is not the same as a drivable route.
How long does it take to drive from Alice Springs, NT to Perth, WA?
The reference driving time on this page is 1 day 4 hrs. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.
Is this a live navigation route?
No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.
How much fuel or electricity could the Alice Springs, NT to Perth, WA trip use?
The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.
Keep Exploring
-
Route overview for Alice Springs, NT to Perth, WA
See the route reference page for the same city pair.
-
Distance page for Alice Springs, NT to Perth, WA
Compare the direct gap with the modeled road distance.
-
More routes from Alice Springs, NT
Explore more outbound route references from the same origin.
-
More routes to Perth, WA
Explore more inbound route references to the same destination.
-
Sydney, NSW to Canberra, ACT
Another route reference in the same country cluster.
-
Ballarat, VIC to Melbourne, VIC
Another route reference in the same country cluster.
-
Driving Guide
Reference driving rules and guidance for the wider area.