Truck Travel Time: Canberra, ACT to Sydney, NSW
How long does it take to drive from Canberra, ACT to Sydney, NSW? Estimated drive time, traffic factors and arrival time calculations.
Based on distance and average speed estimates, not live routing data.
This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.
Print or Save Offline
Use your browser print dialog to print this travel time page or save it as a PDF.
Route Stats Summary
Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.
Reverse Route
Use the return-direction page when you want the same reference data for the trip back.
Trip Energy and Cost
Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.
Truck Fuel Consumption and Cost
Electric Truck Consumption and Charging
- Check commercial charging availability before departure because payload, speed, terrain, and weather can materially change electric truck range.
- Likely needs 1 charging stop unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
- No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.
Travel Time Details
| Estimated driving time | 4 hrs 39 min |
| Driving distance (est.) | 322 km 200 miles |
| Straight-line distance | 247 km 154 miles |
Traffic Factors
These are estimated factors used in the calculation. They do not reflect live traffic conditions.
| Average speed used | 75 km/h47 mph |
| Urban delay near Canberra, ACT | +7 min |
| Urban delay near Sydney, NSW | +15 min |
Travel Tips
- This is a long drive. Plan rest stops every 2 hours and carry water and snacks.
- Departing early in the morning can help you avoid peak traffic in urban areas.
- Actual travel time may vary based on weather, road conditions, and traffic.
Cities and Places Along the Route Corridor
Rest Stop Recommendations
Plan 2 short breaks About every 2 hours of driving time
- Early break Take one short break near Wollongong, NSW if the live route still follows this corridor.
- Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
Cities Along the Route
Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.
Route Introduction
The reference drive time from Canberra, ACT to Sydney, NSW is about 4 hrs 39 min. It is a modeled estimate based on distance and endpoint delay assumptions, not live traffic.
Route Context
- The modeled road trip is about 74 km longer than the direct distance, which is common when roads cannot follow a straight path.
- One end of the trip is a large urban area, so the final approach can add more variability than the open-road segment.
Travel Factors
| Reference road distance | 322 km200 mi |
| Modeled from the stored city pair and the site distance estimator. | |
| Reference drive time | 4 hrs 39 min |
| This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan. | |
| Modeled planning speed | 75 km/h47 mph |
| Used only to model the reference travel time. It does not reflect live traffic or road conditions. | |
| Urban-delay exposure | Higher |
| Based on the population scale around Canberra, ACT and Sydney, NSW, which can make departure and arrival less predictable than the middle portion of the drive. | |
Practical Travel Tips
- Plan at least one break instead of treating the estimate as uninterrupted wheel time.
- Arrival timing matters near Sydney, NSW because the last segment of the drive is often less predictable than the open-road portion.
- Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.
FAQ
How far is Canberra, ACT from Sydney, NSW by road?
The page models the road trip at about 322 km (200 miles). That is a reference estimate, not a live turn-by-turn route result.
What is the straight-line distance between Canberra, ACT and Sydney, NSW?
The direct geographic gap is about 247 km. It is useful as a comparison point, but it is not the same as a drivable route.
How long does it take to drive from Canberra, ACT to Sydney, NSW?
The reference driving time on this page is 4 hrs 39 min. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.
Is this a live navigation route?
No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.
How much fuel or electricity could the Canberra, ACT to Sydney, NSW trip use?
The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.
Keep Exploring
-
Reverse trip from Sydney, NSW to Canberra, ACT
Open the return direction as part of the same route cluster.
-
Route overview for Canberra, ACT to Sydney, NSW
See the route reference page for the same city pair.
-
Distance page for Canberra, ACT to Sydney, NSW
Compare the direct gap with the modeled road distance.
-
More routes from Canberra, ACT
Explore more outbound route references from the same origin.
-
More routes to Sydney, NSW
Explore more inbound route references to the same destination.
-
Brisbane, QLD to Perth, WA
Another route reference in the same country cluster.
-
Ballarat, VIC to Melbourne, VIC
Another route reference in the same country cluster.
-
Driving Guide
Reference driving rules and guidance for the wider area.