Truck Travel Time: Townsville, QLD to Hobart, TAS
How long does it take to drive from Townsville, QLD to Hobart, TAS? Estimated drive time, traffic factors and arrival time calculations.
Based on distance and average speed estimates, not live routing data.
This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.
Print or Save Offline
Use your browser print dialog to print this travel time page or save it as a PDF.
Route Stats Summary
Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.
Reverse Route
Hobart, TAS to Townsville, QLD
Use the return-direction page when you want the same reference data for the trip back.
Trip Energy and Cost
Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.
Truck Fuel Consumption and Cost
Electric Truck Consumption and Charging
- This is a charging-dependent electric truck trip. Treat the estimate as a planning baseline, then confirm compatible charging stops before departure.
- Likely needs 18 charging stops unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
- No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.
Travel Time Details
| Estimated driving time | 1 day 13 hrs |
| Driving distance (est.) | 3,154 km 1,960 miles |
| Straight-line distance | 2,628 km 1,633 miles |
Traffic Factors
These are estimated factors used in the calculation. They do not reflect live traffic conditions.
| Average speed used | 85 km/h53 mph |
| Urban delay near Townsville, QLD | +5 min |
| Urban delay near Hobart, TAS | +5 min |
Travel Tips
- This is a long drive. Plan rest stops every 2 hours and carry water and snacks.
- Fill up your tank before departing — fuel stations may be sparse on some stretches.
- Departing early in the morning can help you avoid peak traffic in urban areas.
- Actual travel time may vary based on weather, road conditions, and traffic.
Cities and Places Along the Route Corridor
Rest Stop Recommendations
Plan 18 short breaks About every 2 hours of driving time
- Early break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
- Mid-route break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
- Later break Take one short break about every 2 hours of wheel time for fuel, food, or a short walk.
Suggested Overnight Stops
Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.
Route Introduction
The reference drive time from Townsville, QLD to Hobart, TAS is about 1 day 13 hrs. It is a modeled estimate based on distance and endpoint delay assumptions, not live traffic.
Route Context
- The modeled road trip is about 526 km longer than the direct distance, which is common when roads cannot follow a straight path.
- Most of this reference trip is driven over a longer intercity distance, so stop planning matters more than local street detail.
Travel Factors
| Reference road distance | 3154 km1960 mi |
| Modeled from the stored city pair and the site distance estimator. | |
| Reference drive time | 1 day 13 hrs |
| This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan. | |
| Modeled planning speed | 85 km/h53 mph |
| Used only to model the reference travel time. It does not reflect live traffic or road conditions. | |
| Urban-delay exposure | Lower |
| Based on the population scale around Townsville, QLD and Hobart, TAS, which can make departure and arrival less predictable than the middle portion of the drive. | |
Practical Travel Tips
- Plan at least one break instead of treating the estimate as uninterrupted wheel time.
- Check fuel, charging, or meal-stop options before departure, because longer trips are less forgiving if you leave too little margin.
- Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.
FAQ
How far is Townsville, QLD from Hobart, TAS by road?
The page models the road trip at about 3154 km (1960 miles). That is a reference estimate, not a live turn-by-turn route result.
What is the straight-line distance between Townsville, QLD and Hobart, TAS?
The direct geographic gap is about 2628 km. It is useful as a comparison point, but it is not the same as a drivable route.
How long does it take to drive from Townsville, QLD to Hobart, TAS?
The reference driving time on this page is 1 day 13 hrs. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.
Is this a live navigation route?
No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.
How much fuel or electricity could the Townsville, QLD to Hobart, TAS trip use?
The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.
Keep Exploring
-
Reverse trip from Hobart, TAS to Townsville, QLD
Open the return direction as part of the same route cluster.
-
Route overview for Townsville, QLD to Hobart, TAS
See the route reference page for the same city pair.
-
Distance page for Townsville, QLD to Hobart, TAS
Compare the direct gap with the modeled road distance.
-
More routes from Townsville, QLD
Explore more outbound route references from the same origin.
-
More routes to Hobart, TAS
Explore more inbound route references to the same destination.
-
Brisbane, QLD to Perth, WA
Another route reference in the same country cluster.
-
Sydney, NSW to Canberra, ACT
Another route reference in the same country cluster.
-
Driving Guide
Reference driving rules and guidance for the wider area.