Truck Travel Time: Seattle, WA to Albany, NY
How long does it take to drive from Seattle, WA to Albany, NY? Estimated drive time, traffic factors and arrival time calculations.
Based on distance and average speed estimates, not live routing data.
This map shows the start and end locations only. Use the live planner for turn-by-turn navigation.
Print or Save Offline
Use your browser print dialog to print this travel time page or save it as a PDF.
Route Stats Summary
Reference values are modeled during page build. Use the live planner for current turn-by-turn timing.
Reverse Route
Use the return-direction page when you want the same reference data for the trip back.
Trip Energy and Cost
Usage is estimated from the modeled route distance. Cost is calculated only when you enter your own price.
Truck Fuel Consumption and Cost
Electric Truck Consumption and Charging
- Check commercial charging availability before departure because payload, speed, terrain, and weather can materially change electric truck range.
- Likely needs 1 charging stop unless your vehicle has a substantially larger usable battery pack or a lighter operating load.
- No local charger POI dataset is attached to this corridor yet, so use the live planner to check exact charging stops.
Travel Time Details
| Estimated driving time | 4 hrs 47 min |
| Driving distance (est.) | 327 km 203 miles |
| Straight-line distance | 252 km 157 miles |
Traffic Factors
These are estimated factors used in the calculation. They do not reflect live traffic conditions.
| Average speed used | 75 km/h47 mph |
| Urban delay near Seattle, WA | +15 min |
| Urban delay near Albany, NY | +10 min |
Travel Tips
- This is a long drive. Plan rest stops every 2 hours and carry water and snacks.
- Departing early in the morning can help you avoid peak traffic in urban areas.
- Actual travel time may vary based on weather, road conditions, and traffic.
- Speed limits vary by state. Check local regulations along your route.
Cities and Places Along the Route Corridor
Rest Stop Recommendations
Plan 2 short breaks About every 2 hours of driving time
- Early break Take one short break near Minneapolis, MN if the live route still follows this corridor.
- Later break Take one short break near St. Paul, MN if the live route still follows this corridor.
Cities Along the Route
Places along or near this route corridor appear only when a local OSM-derived corridor dataset is available.
Route Introduction
The reference drive time from Seattle, WA to Albany, NY is about 4 hrs 47 min. It is a modeled estimate based on distance and endpoint delay assumptions, not live traffic.
Route Context
- The modeled road trip is about 76 km longer than the direct distance, which is common when roads cannot follow a straight path.
- One end of the trip is a large urban area, so the final approach can add more variability than the open-road segment.
Travel Factors
| Reference road distance | 327 km203 mi |
| Modeled from the stored city pair and the site distance estimator. | |
| Reference drive time | 4 hrs 47 min |
| This is a continuous driving estimate based on the modeled route length, not a rest-inclusive trip plan. | |
| Modeled planning speed | 75 km/h47 mph |
| Used only to model the reference travel time. It does not reflect live traffic or road conditions. | |
| Urban-delay exposure | Higher |
| Based on the population scale around Seattle, WA and Albany, NY, which can make departure and arrival less predictable than the middle portion of the drive. | |
Practical Travel Tips
- Plan at least one break instead of treating the estimate as uninterrupted wheel time.
- If you can choose your departure time, leaving Seattle, WA outside the busiest local period can reduce early-route delay.
- Use the live planner when departure time, closures, incidents, or exact turn-by-turn steps matter.
FAQ
How far is Seattle, WA from Albany, NY by road?
The page models the road trip at about 327 km (203 miles). That is a reference estimate, not a live turn-by-turn route result.
What is the straight-line distance between Seattle, WA and Albany, NY?
The direct geographic gap is about 252 km. It is useful as a comparison point, but it is not the same as a drivable route.
How long does it take to drive from Seattle, WA to Albany, NY?
The reference driving time on this page is 4 hrs 47 min. It is modeled from distance and endpoint assumptions, so use the live planner for current conditions.
Is this a live navigation route?
No. This page is a reference view built from modeled route data. Use the live planner for current turn-by-turn navigation.
How much fuel or electricity could the Seattle, WA to Albany, NY trip use?
The page estimates usage only. Enter your own fuel or electricity price if you want a trip-cost estimate.
Keep Exploring
-
Reverse trip from Albany, NY to Seattle, WA
Open the return direction as part of the same route cluster.
-
Route overview for Seattle, WA to Albany, NY
See the route reference page for the same city pair.
-
Distance page for Seattle, WA to Albany, NY
Compare the direct gap with the modeled road distance.
-
More routes from Seattle, WA
Explore more outbound route references from the same origin.
-
More routes to Albany, NY
Explore more inbound route references to the same destination.
-
Montgomery, AL to Atlanta, GA
Another route reference in the same country cluster.
-
Nashville, TN to Atlanta, GA
Another route reference in the same country cluster.
-
Driving Guide
Reference driving rules and guidance for the wider area.